Vortex Strike Eagle 1-8×24 FFP Scope & CM-202 30mm Cantilever Scope Mount w/ 2 Inch Offset Bundle

Vortex Strike Eagle 1-8×24 FFP Scope

The Vortex Strike Eagle 1-8×24 is a First Focal Plane scope that was designed so you can dominate close quarters and stretch your effective range. It features a EBR-8 reticle that provides true red dot like performance at 1x and holdovers out to 600 yards, and an included ranging feature lets you make quick decisions in the reticle. With 9 daylight and 2 night vision settings, you can dial up illumination to perfectly match your shooting scenario. Put all that in a 30mm tube with capped turrets to keep your zero safe, plus a throw lever for rapid mag changes, and you have an LPVO born to ring steel.

Vortex Strike Eagle 1-8×24 Features

First Focal Plane Reticle

Accurate holdovers through the entire magnification range.

EBR-8 Reticle

Lightning fast target acquisition on 1x and holdovers out to 600 yards.

Throw Lever

The included throw lever can be installed for quick and easy magnification adjustments.

XD Optical System

Fully MultiCoated Lenses

Proprietary coatings increase light transmission with multiple anti-reflective coatings on all air to glass surfaces.

ArmorTek

Ultra hard, scratch resistant coating protects exterior lenses from scratches, oil and dirt.

Waterproof

O-ring seals prevent moisture, dust and debris from penetrating for reliable performance in all environments.

Fogproof

Nitrogen gas purging prevents internal fogging over a wide range of temperatures.

Shockproof

Rugged construction withstands recoil and impact.

EBR-8 Reticle

Vortex’s exclusive EBR-8 MOA first focal plane, glass etched, illuminated reticle facilitates rapid shooting from point blank out to 600 yards with popular .223/5.56mm and .308/7.62mm loads. This reticle also can be used with a wide variety of other calibers and loads using the BDC hashmarks. It features a .75 MOA center dot, 12 MOA open circle.

In the Box

Flip Caps

Throw Lever

Lens Cloth

CR2032 Battery

2mm Hex Wrench

Sunshade

---

---

Vortex Cantilever Scope Mount

Vortex cantilever ring mounts provide the correct height and forward placement for proper scope mounting on flattop ARs. Available for 30 mm tubes in 2 inch or 3 inch offset.

---